Tips For Taking a Blood Glucose Test
Blood glucose (blood sugar) measurement is probably the most important tool you get to see if your blood sugar levels are in your ideal target range. This tells you your blood sugar level at any given time. It's critical for blood glucose levels to remain in an optimal range all day. The reason is that the cells in your body won't generate or use insulin until they have their glucose supply.
Most people don't carry around their laboratory analysis and they rely on vein blood samples every time they get hungry, thirsty or any abnormal symptom. However, this is a very accurate way of monitoring, It is harmful, and tends to be expensive and many people don't have a lot of time to go to the laboratory several times.
You can buy a blood glucose meter from any store or online from Medical Me, but you may not always be able to see it properly. There are new models that come with built-in display screens. This makes it easier to read and remember. Your doctor should be able to help you choose a good model and we also can help you. Alternatively, you can get a monitor that comes with an external monitor that shows you your blood glucose levels in real-time. This is a better choice for people who have trouble remembering their test strips and lancets.
Once you've purchased your blood glucose meter, it's time to learn how to use it. One important thing to remember is that you need to prick the skin of your fingertip in the area where you will be collecting your blood sample. You don't want to end up with a red pimple because you didn't prick enough, so take care. If you prick your finger and then leave it alone for a few minutes, the pimple should dry up and go away.
Next, you will insert the blood glucose meter into your own skin, or if you are using a skin test strip, the strip can be placed on a lancet. When you feel a burning sensation or a slight tingling, this means the meter has begun to process the sample. Then you will insert a disposable syringe into the meter, which has a needle at the tip. With the needle pointed into the blood, you will draw a small amount of blood and then write down the result on the control test strip.
Most people can tell when their blood glucose meter has gone off by looking at the numbers on the screen. If they are consistent, then they are using the right meter. The meter will continue to measure your blood glucose level throughout the day, and then give you an estimate of how much your current level is. At the beginning of the month, you can schedule a visit to your physician to have your blood sample tested to make sure that your diabetes medications are working and to make sure that you are following your medication instructions.
There are different brands of glucose meters available on the market, and you may need to do a little research to determine which one is right for you. Your health care provider can advise you of brand names and their compatibility with your blood pressure, insulin, and glucose levels. They may even recommend a particular brand to try for a short period of time to see if it helps your symptoms. There are different brands, so you should first review the brand choices with your physician and then choose one. There are many brands to choose from, including some that are specifically designed for diabetics, so you may need to talk to your physician about your options.
When using a finger-printer-type glucometer with a fingerprint facility, you should wash and dry the test strip before you dip it into the meter's warm water. Then, you should prick your finger a few times into the strip and pull it out easily, letting the blood sample leak out into the meter. You should then immediately prick your finger again in to the glucose meter's palm pad, letting the blood sample leak out into the same place again. If the meter indicates that you've taken enough blood samples, it will turn red. If the reading stays the same, you should go ahead and collect your written and your blood glucose report.
- February 2022